Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

mesh import from ANSYS Fluent to COMSOL

Posted 2011年4月10日 GMT-4 13:18 Fluid & Heat, General, Computational Fluid Dynamics (CFD) Version 3.5a 1 Reply

Amer Malik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

i want to import .msh mesh file to comsol, but it seems i can only import .mphtxt and .mphbin,
any suggestions.
1 Reply Last Post 2011年4月10日 GMT-4 17:43
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月10日 GMT-4 17:43
Hi

if you check the doc you will see that you can only import a NASTRAN neutral file format.
But anyhow, what to do with a mesh ?

You connect the physics to Geometrical Entities in COMSOL, and the meshing comes thereafter, it gets its "properties by inherence, this is a fundamental difference between classical (or olders) FEM programmes and the COMSOL approach

You need to transform the mesh to higher order geometrical entities (which is partially done in 3.5 on some simple Nastran neutral file type meshes)

--
Good luck
Ivar
Hi if you check the doc you will see that you can only import a NASTRAN neutral file format. But anyhow, what to do with a mesh ? You connect the physics to Geometrical Entities in COMSOL, and the meshing comes thereafter, it gets its "properties by inherence, this is a fundamental difference between classical (or olders) FEM programmes and the COMSOL approach You need to transform the mesh to higher order geometrical entities (which is partially done in 3.5 on some simple Nastran neutral file type meshes) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content