Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Locked This discussion was locked by a forum moderator.

RF module Mie scattering tutorial (gold sphere)

Posted 2011年4月11日 GMT-4 22:45 RF & Microwave Engineering, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 3.5a, Version 4.1, Version 4.2, Version 4.3 9 Replies

WB Zou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

www.comsol.com/showroom/gallery/3459/
I obtained the absorption cross-section and scattering cross-section,but i want to obtain

absorption coefficient and scattering coefficient ? what to do next?

thanks a lot
9 Replies Last Post 2017年2月13日 GMT-5 09:11
COMSOL Moderator

Hello WB Zou

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Anupam Ghosh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年7月29日 GMT-4 07:11
hi WB,

i am having trouble in calculating scattering cross secrion and absorbstion cross section in comsol 4.2 ,which is basically re-writing - mie scattering from sphere 3.5a in version to 4.2. Can u help me figure out the error.
hi WB, i am having trouble in calculating scattering cross secrion and absorbstion cross section in comsol 4.2 ,which is basically re-writing - mie scattering from sphere 3.5a in version to 4.2. Can u help me figure out the error.

Attachments:

keya zhou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年8月25日 GMT-4 03:31
Hi, Anupam Ghosh

I downloaded your mph file. However, it cannot be performed in our workstation.

I guess it is the problem that several variables should be changed to ones which can be recognized by COMSOL 4.2.

In fact, I can not find variables like "scEx, scEy" etc in COMSOL 4.2

Have you solved the problem?


hi WB,

i am having trouble in calculating scattering cross secrion and absorbstion cross section in comsol 4.2 ,which is basically re-writing - mie scattering from sphere 3.5a in version to 4.2. Can u help me figure out the error.


Hi, Anupam Ghosh I downloaded your mph file. However, it cannot be performed in our workstation. I guess it is the problem that several variables should be changed to ones which can be recognized by COMSOL 4.2. In fact, I can not find variables like "scEx, scEy" etc in COMSOL 4.2 Have you solved the problem? [QUOTE] hi WB, i am having trouble in calculating scattering cross secrion and absorbstion cross section in comsol 4.2 ,which is basically re-writing - mie scattering from sphere 3.5a in version to 4.2. Can u help me figure out the error. [/QUOTE]
keya zhou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年8月25日 GMT-4 03:32
Hi, WB.

I am now using v4.2. Have you ever got the ACS and SCS in v4.2？

We have problems realizing the model in v4.2.



www.comsol.com/showroom/gallery/3459/
I obtained the absorption cross-section and scattering cross-section,but i want to obtain

absorption coefficient and scattering coefficient ? what to do next?

thanks a lot


Hi, WB. I am now using v4.2. Have you ever got the ACS and SCS in v4.2？ We have problems realizing the model in v4.2. [QUOTE] http://www.comsol.com/showroom/gallery/3459/ I obtained the absorption cross-section and scattering cross-section,but i want to obtain absorption coefficient and scattering coefficient ? what to do next? thanks a lot [/QUOTE]
Anupam Ghosh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年8月25日 GMT-4 04:43
Hi keya,

Thanks for trying to trouble shoot the problem.

Yes u r correct - its the variable mismatch that's causing the problem .

For info about variable names in Comsol 4.2 ,try the equation view mode (in model builder tab --> an eye is made -->click n choose equation view) and then see various categories under the physics --> electromagnetic waves.

I have still not figured out the way to run 3.5a Mie scattering in 4.2 but the method i m adopting is :-
i m running the 3.5a program in 3.5a and then i ll compare (check out - "equation system view" in 3.5a, u can find more about it in help files of 3.5a + Far-Field post processing in 3.5a) with the settings in 4.2 ,may be that can give a clue about modifications to b made in 3.5a version so as to run it in 4.2.

keep me updated with yr progress...
Hi keya, Thanks for trying to trouble shoot the problem. Yes u r correct - its the variable mismatch that's causing the problem . For info about variable names in Comsol 4.2 ,try the equation view mode (in model builder tab --> an eye is made -->click n choose equation view) and then see various categories under the physics --> electromagnetic waves. I have still not figured out the way to run 3.5a Mie scattering in 4.2 but the method i m adopting is :- i m running the 3.5a program in 3.5a and then i ll compare (check out - "equation system view" in 3.5a, u can find more about it in help files of 3.5a + Far-Field post processing in 3.5a) with the settings in 4.2 ,may be that can give a clue about modifications to b made in 3.5a version so as to run it in 4.2. keep me updated with yr progress...
keya zhou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年8月25日 GMT-4 04:56
I already tried the equation view mode. However, I cannot find the scattered electromagnetic field corresponding to scEx, or scHy etc.

BTW, it seems that the parameters and variables are both changed in COMSOL v4.2. I guess it might be the reason why we cannot perform the simulation in 4.2.

I am now studying on that.

"www.comsol.com/community/forums/general/thread/18827/" also gave some comments on this issue which might help.




Hi keya,

Thanks for trying to trouble shoot the problem.

Yes u r correct - its the variable mismatch that's causing the problem .

For info about variable names in Comsol 4.2 ,try the equation view mode (in model builder tab --> an eye is made -->click n choose equation view) and then see various categories under the physics --> electromagnetic waves.

I have still not figured out the way to run 3.5a Mie scattering in 4.2 but the method i m adopting is :-
i m running the 3.5a program in 3.5a and then i ll compare (check out - "equation system view" in 3.5a, u can find more about it in help files of 3.5a + Far-Field post processing in 3.5a) with the settings in 4.2 ,may be that can give a clue about modifications to b made in 3.5a version so as to run it in 4.2.

keep me updated with yr progress...


I already tried the equation view mode. However, I cannot find the scattered electromagnetic field corresponding to scEx, or scHy etc. BTW, it seems that the parameters and variables are both changed in COMSOL v4.2. I guess it might be the reason why we cannot perform the simulation in 4.2. I am now studying on that. "http://www.comsol.com/community/forums/general/thread/18827/" also gave some comments on this issue which might help. [QUOTE] Hi keya, Thanks for trying to trouble shoot the problem. Yes u r correct - its the variable mismatch that's causing the problem . For info about variable names in Comsol 4.2 ,try the equation view mode (in model builder tab --> an eye is made -->click n choose equation view) and then see various categories under the physics --> electromagnetic waves. I have still not figured out the way to run 3.5a Mie scattering in 4.2 but the method i m adopting is :- i m running the 3.5a program in 3.5a and then i ll compare (check out - "equation system view" in 3.5a, u can find more about it in help files of 3.5a + Far-Field post processing in 3.5a) with the settings in 4.2 ,may be that can give a clue about modifications to b made in 3.5a version so as to run it in 4.2. keep me updated with yr progress... [/QUOTE]
Anupam Ghosh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年8月25日 GMT-4 05:13
Yes , i have see that thread .rfw vs .emw

i think the way the same algorithm of 3.5a will b executed in 4.2 will b different (even after fixing the variable issue).

now since we know the problem, lets see if we can come up with the solution.

best...
Yes , i have see that thread .rfw vs .emw i think the way the same algorithm of 3.5a will b executed in 4.2 will b different (even after fixing the variable issue). now since we know the problem, lets see if we can come up with the solution. best...
Adnan Khan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年10月4日 GMT-4 14:01
Hi guys,
I just saw this thread. I am also having the same problem in calculating the far field properties of a nanosphere in v4.2. Did you guys figure out the problem if yes then please guide me also.

Thanks,
BR,
Adnan
Hi guys, I just saw this thread. I am also having the same problem in calculating the far field properties of a nanosphere in v4.2. Did you guys figure out the problem if yes then please guide me also. Thanks, BR, Adnan
Shoukat Ali
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年2月11日 GMT-5 15:21
any one have find scartering and absorptin cross section then sendme please...
any one have find scartering and absorptin cross section then sendme please...
Walter Frei COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年2月13日 GMT-5 09:11
Hello,
The discussion in this thread originates with a model that is out-of-date and no longer available on our website. That model addressed the question of modeling scattering off of a gold nanoshpere, and there is a newer model that should address all of the questions raised here:
www.comsol.com/model/optical-scattering-by-gold-nanospheres-14697

Since this thread does discuss questions relating to an out-of-date model, we are going to close this thread for further comments. If there are questions about the above model, please of course feel free to open a new discussion thread.
Best Regards,
Hello, The discussion in this thread originates with a model that is out-of-date and no longer available on our website. That model addressed the question of modeling scattering off of a gold nanoshpere, and there is a newer model that should address all of the questions raised here: https://www.comsol.com/model/optical-scattering-by-gold-nanospheres-14697 Since this thread does discuss questions relating to an out-of-date model, we are going to close this thread for further comments. If there are questions about the above model, please of course feel free to open a new discussion thread. Best Regards,

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content