Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary plots?

Please login with a confirmed email address before reporting spam

In comsol 3.2 Femlab, I plotted the boundary plot.

But, i can't find the boundary plot in comsol 4.0a.

How can i boundary plot?

plz help...

Thanks~

1 Reply Last Post 2011年5月2日 GMT-4 16:19
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年5月2日 GMT-4 16:19
Hi

the best is to take a few videos from the main site, and do a few model library examples ;)
if you are in 3D a boundary plot is a "2D" plot, add a 2D plot node, right click the node and add asurface node, then define the variable on this node

ifyou are in 2D a boundary is a line, hence call/add a Line plot node, then add asubnode dependig on your needs

--
Good luck
Ivar
Hi the best is to take a few videos from the main site, and do a few model library examples ;) if you are in 3D a boundary plot is a "2D" plot, add a 2D plot node, right click the node and add asurface node, then define the variable on this node ifyou are in 2D a boundary is a line, hence call/add a Line plot node, then add asubnode dependig on your needs -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.