Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Delay between two rectangular pulses

Posted 2018年5月29日 GMT-4 13:52 Low-Frequency Electromagnetics, RF & Microwave Engineering 2 Replies

Mohammed Al-Daloo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi there,

I am new to COMSOL and currently running a very basic simulation that I have many rectangular pulses. I am just wondering how I could to calculate the delay time between these pulses.

Attachments:

2 Replies Last Post 2018年5月30日 GMT-4 13:13
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2018年5月29日 GMT-4 14:07

Mohammed,

you may want to try to calculate the cross correlation and find its maximum.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Mohammed, you may want to try to calculate the cross correlation and find its maximum. Cheers Edgar
Mohammed Al-Daloo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2018年5月30日 GMT-4 13:13

Hi Edgar

Thanks for reply, sorry, and hope to bear with me, but i dont have idea about how to do that in comsol and if I do that does it give the time at which moment, as I'm interesting in the delay time of the signal at the 50% and 90% of the rise edge.

Thanks Mohammed

Hi Edgar Thanks for reply, sorry, and hope to bear with me, but i dont have idea about how to do that in comsol and if I do that does it give the time at which moment, as I'm interesting in the delay time of the signal at the 50% and 90% of the rise edge. Thanks Mohammed

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content