Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

defining a Gaussian heat source

Posted 2011年5月21日 GMT-4 12:47 Heat Transfer & Phase Change 5 Replies

Amina Ben Amor
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hello, I am trying to simulate an hybrid laser welding model using COMSOl.. I need to use a 2D Gaussian heat source but I don't know how to define it or the expression to use.. could you help me?
thanks
5 Replies Last Post 2017年5月26日 GMT-4 09:40
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年5月23日 GMT-4 01:53
Hi
try a search on the forum, it has been discussed a few times, and there are several examples out here

--
Good luck
Ivar
Hi try a search on the forum, it has been discussed a few times, and there are several examples out here -- Good luck Ivar
Qingqing Cheng
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年6月17日 GMT-4 07:28
Hi:

A difficult question on 3-dimension RF module be on the corner.Seeking help be on the way orient to Comsol company.Please tell me the e-mail address!thank you```
Regardly,
Hi: A difficult question on 3-dimension RF module be on the corner.Seeking help be on the way orient to Comsol company.Please tell me the e-mail address!thank you``` Regardly,
Qingqing Cheng
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年6月17日 GMT-4 07:35
Updated: 8 years ago 2017年5月26日 GMT-4 10:48
How can I get this picture??

I don`t know how to set the solver parameter??thanks for you reply!
regardly

How can I get this picture?? I don`t know how to set the solver parameter??thanks for you reply! regardly

Attachments:

Reza Esfahani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月21日 GMT-5 07:58
Dear User,

Using comsoI,I am trying to model laser welding of dissimilar materials while the work-piece is moving with constant speed beneath the laser nozzle.Unfortunately,it seems,I have roughly the same problem you had to define the heat source.(In my case I am looking to define a volumetric Gaussian heat source as I think the heat source should be w/m^3.

Now i just was wondering if you could kindly let me know how did you define the heat source in your case or if you have any idea.

Thanks for your taking time to read my email,

Kindly Regards
Reza
Dear User, Using comsoI,I am trying to model laser welding of dissimilar materials while the work-piece is moving with constant speed beneath the laser nozzle.Unfortunately,it seems,I have roughly the same problem you had to define the heat source.(In my case I am looking to define a volumetric Gaussian heat source as I think the heat source should be w/m^3. Now i just was wondering if you could kindly let me know how did you define the heat source in your case or if you have any idea. Thanks for your taking time to read my email, Kindly Regards Reza
Santosh Gupta
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年5月26日 GMT-4 09:40
can I access a video that simulates the laser welding
can I access a video that simulates the laser welding

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content