Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

On Simulation of EHD Printing

Posted 2018年10月8日 GMT-4 07:17 Low-Frequency Electromagnetics, Interfacing, Microfluidics Version 5.3a 1 Reply

Ayush Kumar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

HI, Question is that :- I want to perform a simulation of EHD printing but do not know how to define the forces namely Fx and Fy. Please suggest me how to deal with it? Also I want to apply a biased voltage to my comsol model rather than a constant DC voltage. How can I do that? Anybody please help me. Thanks in advance!

With regards , AYUSH KUMAR

1 Reply Last Post 2018年10月9日 GMT-4 13:45
Nirmal Paudel Tribhuvan University/Electrical Engineering
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2018年10月9日 GMT-4 13:45

Hi Ayush,

The information that you have in the questions is not enough to answer your question. It might be helpful if you share the model file or the description of the problem in detail.

BR/Nirmal

Hi Ayush, The information that you have in the questions is not enough to answer your question. It might be helpful if you share the model file or the description of the problem in detail. BR/Nirmal

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content