Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

contact angle

Posted 2011年7月22日 GMT-4 11:46 Version 4.2 1 Reply

Osameh Ghazian
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi friends,

How can we have different contact angle for a boundary ? I want that the contact angle change during the simulation and not to set a fixed contact angle for a boundary as it is available in wetted wall boundary condition.


best
1 Reply Last Post 2011年7月22日 GMT-4 12:38
Ryan McDevitt
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年7月22日 GMT-4 12:38
If you have a function that defines the change in contact angle, you can set that. There are examples of this in the Microfluidics module (and possibly elsewhere).
If you have a function that defines the change in contact angle, you can set that. There are examples of this in the Microfluidics module (and possibly elsewhere).

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content