Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
WBK Tunneling Model and Thin Insulator Gate
Posted 2018年10月18日 GMT-4 07:32 Semiconductor Devices Version 5.4 0 Replies
Please login with a confirmed email address before reporting spam
Hello,
I am using COMSOL 5.4 with the semiconductor module and I'm trying to simulate a structure that is similar to this one https://www.comsol.de/model/heterojunction-tunneling-65761 , but with a Thin Insulator Gate on top of it (Boundary 6 in the model). I applied a voltage of 1 V on this gate.
My problem is that as soon as I add this gate, the simulation doesn't work anymore and gives me the following error:
Undefined value found. - Detail: Undefined value found in the equation residual vector. There are 23 degrees of freedom giving NaN/Inf in the vector for the variable comp1.Efn_. at coordinates: (4.08452e-08,0), (4.04603e-08,1.18994e-08), (4.2633e-08,2.95524e-09), (4.44208e-08,5.91047e-09), (4.63485e-08,2.95524e-09), ... There are 23 degrees of freedom giving NaN/Inf in the vector for the variable comp1.Efp_. at coordinates: (4.08452e-08,0), (4.04603e-08,1.18994e-08), (4.2633e-08,2.95524e-09), (4.44208e-08,5.91047e-09), (4.63485e-08,2.95524e-09), ... There are 23 degrees of freedom giving NaN/Inf in the vector for the variable comp1.V. at coordinates: (4.08452e-08,0), (4.04603e-08,1.18994e-08), (4.2633e-08,2.95524e-09), (4.44208e-08,5.91047e-09), (4.63485e-08,2.95524e-09), ...
Please help me, I can't figure out what I did wrong!
Cheers, Simon
Hello Simon Geyer
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.