Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Deflection of Thin Membrane Under Pressure

Posted 2011年8月3日 GMT-4 15:29 Version 4.0a 0 Replies

Ravi Shah
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am working on modeling the deflection of a thin, circular parylene membrane with an attached cylindrical silicon boss (see attached file). I am using a 2D-axisymmetric model with the Solid Mechanics module.

I am getting results very different from those I expect. I have verified all the material properties and geometric parameters but cannot figure out what's wrong. I am solving for deformation in the z-direction and getting on the order of 2mm when I should be getting around 50 um (expected number is from experimental results and an ANSYS model).

The parylene membrane is fixed at its outermost edge and has a pressure of 100 mmHg pushing up on it, all of which I believe I modeled in the same way as the ANSYS model. The reason I'm trying to make a COMSOL model now is so that I can include the initial stress (to model the residual stress in the parylene). I solved the model without the initial stress in COMSOL and still got an unrealistic answer.

Can you offer any insight as to what I'm doing wrong?

Attachments:

0 Replies Last Post 2011年8月3日 GMT-4 15:29
COMSOL Moderator

Hello Ravi Shah

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content