Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Finding the normal vector of the surface

Posted 2011年8月12日 GMT-4 12:35 Version 4.2 1 Reply

Osameh Ghazian
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

Is there anyway to find the normal vector of the surface in Comsol ? especially when you are using level set methods in CFD module ?

Best
1 Reply Last Post 2011年8月13日 GMT-4 13:09
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年8月13日 GMT-4 13:09
Hi

you have the Definitions - Boundary coordinates (pls check carefully your frame) for your geometry, but not sure now how this is related/limited for he "level set method"
I'm currently on holidays, without COMSOL on my laptop, so I would have to get back to the office first to try something out ;)

--
Good luck
Ivar
Hi you have the Definitions - Boundary coordinates (pls check carefully your frame) for your geometry, but not sure now how this is related/limited for he "level set method" I'm currently on holidays, without COMSOL on my laptop, so I would have to get back to the office first to try something out ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content