Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Fluid Injection (2 substances)

Posted 2011年8月14日 GMT-4 17:09 Version 4.1, Version 4.2 3 Replies

Melanie Pigeon
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

My model has a series of tubular conduits. I want a time dependent model that begins with simple water passing in the coils followed by an injection of contrast. What is the best approach to implement this?
3 Replies Last Post 2011年8月15日 GMT-4 13:52
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年8月15日 GMT-4 01:20
Hi

well CFD is not my specality, but for the methodology approach, my suggestion would be to solve a stationary flow water only first and use that as initial conditions for a transient 2 phase mixing solver physics as second step

And I woud use the latest version, it has enhanced CFD capabilities w.r.t the earler v4 releases ;)

--
Good luck
Ivar
Hi well CFD is not my specality, but for the methodology approach, my suggestion would be to solve a stationary flow water only first and use that as initial conditions for a transient 2 phase mixing solver physics as second step And I woud use the latest version, it has enhanced CFD capabilities w.r.t the earler v4 releases ;) -- Good luck Ivar
Melanie Pigeon
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年8月15日 GMT-4 09:31
Hi Ivar,

I already have a solution to the stationary water only model. For the mixing though, how do I implement the appropriate boundary conditions or tell the program what two fluids are present and at what locations. Sorry but I am a newby and I am not sure how to make this model. Is there any sample model you can refer me to for mixing or fluid injection?
Hi Ivar, I already have a solution to the stationary water only model. For the mixing though, how do I implement the appropriate boundary conditions or tell the program what two fluids are present and at what locations. Sorry but I am a newby and I am not sure how to make this model. Is there any sample model you can refer me to for mixing or fluid injection?
Ozgur
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年8月15日 GMT-4 13:52
Take a look at the "micromixer" model example.

Ozgur
Take a look at the "micromixer" model example. Ozgur

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content