Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
"Complex numbers not supported" Error
Posted 2011年8月17日 GMT-4 18:48 Low-Frequency Electromagnetics Version 4.0 1 Reply
Please login with a confirmed email address before reporting spam
Hi, I'm currently running COMSOL 4.0 with the AC/DC module attempting to create a finite element model of human tissue when passing a current through it. There are a bunch of tissues I've set up with electrical properties, and electrodes to both inject and sense current. I think I have everything set up correctly. However, when I run a frequency domain study, I get an error every time saying "Complex numbers not supported by Algebraic multigrid. Segregated group." I do not have any complex numbers being input into my model, and so can only assume that somewhere there's a square root of a negative number etc etc... Can anyone describe what that error code might mean? Or what might need to be modified abou the model to prevent it? I would attach the model here, but it appears to be too big to upload (20 MB).
Thanks very much,
Tyler
Thanks very much,
Tyler
1 Reply Last Post 2011年8月18日 GMT-4 01:44
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
these kind of errors are often difficult to identify ;) Anyhow, I would suggest that you get hand on the latest version and tra again, with a fresh rebuild model in the latest version, as the v4 were not yet fully "ironed out"
--
Good luck
Ivar
these kind of errors are often difficult to identify ;) Anyhow, I would suggest that you get hand on the latest version and tra again, with a fresh rebuild model in the latest version, as the v4 were not yet fully "ironed out"
--
Good luck
Ivar