Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
MMI waveguide design...using PML
Posted 2011年8月26日 GMT-4 11:51 RF & Microwave Engineering, Structural Mechanics Version 4.1, Version 4.3b 1 Reply
Please login with a confirmed email address before reporting spam
I'm new to COMSOL, attended one of the workshops and have been going thru the tutorials.
I'm trying to design a slab waveguide...with a core refractive index of 3.48...cladding of 1.54....about 10um wide...and about 0.5mm long...input port (1um wide) at z=0...output port (1um wide) at end z=0.5mm...and using PML to enclose d waveguide
I want to find the ratio of output to input power (S21) for a particular freq/wavelength. Also, to be able to view the power distribution inside the waveguide...via some colour code, like in photon design ....
PLEASE HELP ME
Thanks,
Chuks.
Hello Chukwugekwu Umezinne
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
i hope that you are well, you subject is very interesting and i am also working on it, please if you solved your problem just tell me, may be we will work together on it.
Best regards
Hassanain