Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

soft iron in v4.0a

Posted 2011年9月7日 GMT-4 07:01 Low-Frequency Electromagnetics Version 4.0a 1 Reply

Daniel Nussbächer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I tried to perform the tutorial "Nonlinear Magnetostrictive Transducer"
www.comsol.com/showroom/documentation/model/6063/
with v4.0a and now face a problem:
I cannot find "Soft iron (with losses)" in the material library.
Is there something wrong with my library or is it just not contained in v4.0a?
I'm a bit confused because in v3.5a it seems to exist due to the concerning tutorial...
Thx in advance,
Daniel
1 Reply Last Post 2011年9月7日 GMT-4 10:43
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年9月7日 GMT-4 10:43
Hi

get hands on the latest version and you will find back all the 3.5... items and much more,
check with your local rep its the easiest

--
Good luck
Ivar
Hi get hands on the latest version and you will find back all the 3.5... items and much more, check with your local rep its the easiest -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content