Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Effective stiffness in the Modal Nalysis

Posted 2009年12月18日 GMT-5 14:02 2 Replies

Sadegh Hajhashemi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi every one,

As you know, Resonance frequency is equal to the square root of effective stiffness divided by effective mass. My question is:
How can I find the effective mass and stiffness for a specific mode in the modal analysis.

Regards,
Sadegh
2 Replies Last Post 2009年12月19日 GMT-5 16:05
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2009年12月19日 GMT-5 15:54
Hi

I assume you are referring to modal "mass partcipation factors", or "effective masses" that you get from most FEM tools in structural modal analysis.
These are extracted from the modal eigenvectors through a particular normalisation, that COMSOL is not using.
So there is no easy way from my knowledge to get them in COMSOL (I have alread complained a couple of time about this, pls forward your need to "support") in very simple cases you might export the matrices to matlab and renormalise them, but most models have so large sparse matrices that this is useless

Ivar
Hi I assume you are referring to modal "mass partcipation factors", or "effective masses" that you get from most FEM tools in structural modal analysis. These are extracted from the modal eigenvectors through a particular normalisation, that COMSOL is not using. So there is no easy way from my knowledge to get them in COMSOL (I have alread complained a couple of time about this, pls forward your need to "support") in very simple cases you might export the matrices to matlab and renormalise them, but most models have so large sparse matrices that this is useless Ivar
Sadegh Hajhashemi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2009年12月19日 GMT-5 16:05
Hi Ivar,

Thank you so much for your response, It was very helpful.

Regards,
Sadegh
Hi Ivar, Thank you so much for your response, It was very helpful. Regards, Sadegh

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content