Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Radiation - Discrete Ordinates

Posted 2018年12月25日 GMT-5 08:23 Heat Transfer Version 5.3a 2 Replies

Natan Padoin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

In the simple model attached an incident irradiation of 10 W/m² is set at the internal walls, but when solving a value as high as ~50 W/m² is reached at this surface. Why?

Attachments:

2 Replies Last Post 2018年12月25日 GMT-5 14:42
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2018年12月25日 GMT-5 14:17
Updated: 6 years ago 2018年12月25日 GMT-5 14:18

Hi Natan,

I see in your model that incident radiation is defined in terms of W/(m^2 * sr). So there may be a factor of approx. 2*pi in between, since the surface approx. looks at a half space?

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi Natan, I see in your model that incident radiation is defined in terms of W/(m^2 * sr). So there may be a factor of approx. 2*pi in between, since the surface approx. looks at a half space? Cheers Edgar
Natan Padoin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2018年12月25日 GMT-5 14:42

Hi Edgar,

Thank you. That makes sense.

Regards,

Natan

Hi Edgar, Thank you. That makes sense. Regards, Natan

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content