Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

ECM (Electro Chemical Machining)

Posted 2019年3月20日 GMT-4 12:35 2 Replies

Mule Tad
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

if any one is working ecm process in 3d geomerty. please help me because i am also working on ecm

2 Replies Last Post 2019年3月26日 GMT-4 06:19
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2019年3月25日 GMT-4 11:27

Hello Mule,

The following couple of links could be good starting points for you:

This blog includes a link to a 2D model.

This paper from the COMSOL Conference is in 3D.

Best regards,

Jeff

-------------------
Jeff Hiller
Hello Mule, The following couple of links could be good starting points for you: This [blog](https://www.comsol.com/blogs/pulsed-electrochemical-machining-a-multiphysics-model) includes a link to a 2D model. This [paper](https://www.comsol.it/paper/accelerated-electrochemical-machining-tool-design-52272) from the COMSOL Conference is in 3D. Best regards, Jeff
Mule Tad
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2019年3月26日 GMT-4 06:19

Thank you Mr.Jeff Hiller for your reply.

I have seen those papers before and i did a similar problem.Here ,my question is ''how to rotate the tool electrode in 3d geametry''

Thanks and regards

Thank you Mr.Jeff Hiller for your reply. I have seen those papers before and i did a similar problem.Here ,my question is ''how to rotate the tool electrode in 3d geametry'' Thanks and regards

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content