Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to set Zero normal pressure gradient in pervious boundary condition?
Posted 2011年10月25日 GMT-4 16:17 Version 4.2, Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
I'm a student at Purdue, I benchmark a paper by modeling the cell with the properties and conditions in the paper.
By doing so, I met the final obstacle, set the zero normal pressure gradient with the pervious boundary condition.
I used the poroelastic physic and for darcy's law in the physics I need to set the boundary with zero normal pressure gradient.
I set the all term zero, ( pressure, elevation, and Rb) but it doesn't wok.
Please let me know how to set the normal pressure gradient is zero (dp/dn =0)
Thank you.
Q.
Hello JinGyu Ock
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.