Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Specifying initial condition as an expression/function in transient problems?
Posted 2011年10月30日 GMT-4 00:03 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I am solving a transient heat transfer problem in version 4.2 and would like to specify a spatially varying temperature distribution (i.e. T=F(x)) as the initial temperature of the domain . Could you tell me how can I achieve this?
Thank you.
I am solving a transient heat transfer problem in version 4.2 and would like to specify a spatially varying temperature distribution (i.e. T=F(x)) as the initial temperature of the domain . Could you tell me how can I achieve this?
Thank you.
1 Reply Last Post 2011年10月30日 GMT-4 02:56
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
well exactly as you wrote it, use "x" or "X" depending on your model, check which is referring to the original Reference frame, i.e. "X" if with solid physics included
Most GUI window entry lines are for equations, you should read it per X,Y,Z, or rather what is applying to a small element dx*dy*dz
--
Good luck
Ivar
well exactly as you wrote it, use "x" or "X" depending on your model, check which is referring to the original Reference frame, i.e. "X" if with solid physics included
Most GUI window entry lines are for equations, you should read it per X,Y,Z, or rather what is applying to a small element dx*dy*dz
--
Good luck
Ivar