Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

hydraulic head contours in COMSOL

Posted 2019年10月30日 GMT-4 22:45 Fluid & Heat, Computational Fluid Dynamics (CFD), Heat Transfer Version 5.4 1 Reply

Asal Bidarmaghz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Deal All, I would like to know if it is possible to import ground water hydraulic head contours into a comsol subsurface model and if yes how would that be implemented within the Darcy's Law equations.

Regads, Asal

1 Reply Last Post 2019年10月31日 GMT-4 09:08
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 2019年10月31日 GMT-4 09:08
Updated: 5 years ago 2019年10月31日 GMT-4 05:08

Hello Asal,

If I understand you correctly, you have obtained outside of COMSOL spatially distributed data (for hydraulic head) that you would like to bring into COMSOL to use in a COMSOL simulation.

You can do that by using Interpolation functions. This somewhat older thread explains how.

Best regards,

Jeff

-------------------
Jeff Hiller
Hello Asal, If I understand you correctly, you have obtained outside of COMSOL spatially distributed data (for hydraulic head) that you would like to bring into COMSOL to use in a COMSOL simulation. You can do that by using Interpolation functions. [This somewhat older thread](https://www.comsol.com/forum/thread/140432/using-external-file-data-for-heat-generation?last=2017-03-30T15:44:46Z) explains how. Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content