Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Calculate impedance variation

Posted 2019年11月14日 GMT+8 01:13 Electromagnetics, Low-Frequency Electromagnetics, Parameters, Variables, & Functions Version 5.2a 6 Replies

Enver Salkim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I would like to calculate impedance variation on a specified boundary based on time dependent study. The way of finding the impedance variation is to calculate elecrtical potential variation and divided this results by terminal current. I am not sure this is the correct way and also model give singularity problem. The model was attached Can you please guide me regaridng that?

Thank you in advance

Enver

6 Replies Last Post 2019年12月9日 GMT+8 19:36
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2019年11月14日 GMT+8 06:06
Updated: 6 years ago 2019年11月14日 GMT+8 01:06
  1. If you want to calculate impedance you should be doing a frequency dependent (sinusoidal steady state) study.
  2. In many modules you can assign a Terminal boundary condition and the terminal impedance is available as a global variable.
  3. There was no model attached. Be sure to remove the solutions before posting.
1. If you want to calculate impedance you should be doing a frequency dependent (sinusoidal steady state) study. 2. In many modules you can assign a Terminal boundary condition and the terminal impedance is available as a global variable. 3. There was no model attached. Be sure to remove the solutions before posting.
Enver Salkim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2019年11月14日 GMT+8 18:05
Updated: 6 years ago 2019年11月14日 GMT+8 18:07

Hi Dave,

Thank you for reply. Sorry, it was my mistake. The model was attached. Would it be possible to look at the model? I have defined bipasic stimulus pulse and applied a boundary.

Kind regards, Enver

Hi Dave, Thank you for reply. Sorry, it was my mistake. The model was attached. Would it be possible to look at the model? I have defined bipasic stimulus pulse and applied a boundary. Kind regards, Enver
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2019年11月14日 GMT+8 23:16
Updated: 6 years ago 2019年11月14日 GMT+8 18:16

See #1. You can only calculate an impedance for sinusoidal excitation. Impedance is only defined for sinusoidal steady state excitation.

See #1. You can only calculate an impedance for sinusoidal excitation. Impedance is only defined for sinusoidal steady state excitation.
Enver Salkim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2019年11月18日 GMT+8 18:40

Hi Dave,

Thank you for your comment. I have to apply bihasic rectangular signal as an input. Do you mean I can not calculate impedance if I apply any types of signals wavefrom but sinusoidal?

Kind regards, Enver

Hi Dave, Thank you for your comment. I have to apply bihasic rectangular signal as an input. Do you mean I can not calculate impedance if I apply any types of signals wavefrom but sinusoidal? Kind regards, Enver
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2019年11月19日 GMT+8 04:24
Updated: 6 years ago 2019年11月18日 GMT+8 23:24

Hi Dave,

Thank you for your comment. I have to apply bihasic rectangular signal as an input. Do you mean I can not calculate impedance if I apply any types of signals wavefrom but sinusoidal?

Kind regards, Enver

That is exactly what I am saying. Impedance is defined as the ratio of the (complex) voltage phasor to the (complex) current phasor. Phasors represent a sinusoidal signal that has been applied for a very long time.

>Hi Dave, > >Thank you for your comment. >I have to apply bihasic rectangular signal as an input. Do you mean I can not calculate impedance if I apply any types of signals wavefrom but sinusoidal? > >Kind regards, >Enver That is exactly what I am saying. Impedance is defined as the ratio of the (complex) voltage phasor to the (complex) current phasor. Phasors represent a sinusoidal signal that has been applied for a very long time.
Enver Salkim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2019年12月9日 GMT+8 19:36
Updated: 6 years ago 2019年12月9日 GMT+8 19:37

Hi Dave,

Thank you for your suggestions. Do I need to just apply preiodic sinusoidal signal to a boundary then calculate impedance variation (I belive I can do terminal voltage/terminal current ) or do I need to define an equation for the impedance variation? If it is possible, can you please guide me on my model?

Kind regards, Enver

Hi Dave, Thank you for your suggestions. Do I need to just apply preiodic sinusoidal signal to a boundary then calculate impedance variation (**I belive I can do terminal voltage/terminal current** ) or do I need to define an equation for the impedance variation? If it is possible, can you please guide me on my model? Kind regards, Enver

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content