Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Problem of the Electrical-Mechanical-Electrical Process of Piezoelement

Posted 2019年11月27日 GMT-5 10:02 Piezoelectric Devices Version 5.4 3 Replies

Siyuan Li
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi!

I have a model with 2 piezoelemts sticked together. On the left side I input a 1V 10kHz sin signal and on the right side I can only get about 0.1V. I have also made a experiment with 2 piezoelements (EPZ-20ms64w), but the output was about 960mV. Besides the deformation of Piezo looks quite strange. Did I set something wrong or just I missed other modules?

The 2 piezo elements were attached to a copper plate and the polarization direction was set to the X axis (global coordinate).

I also uploaded my mph file in the attachment. The first one uses Piezoelectric Devices, the second one uses Acoustic-Piezoelectric Interaction.

Can anyone help me with this? This is important for my master thesis! Thank you!

3 Replies Last Post 2020年1月21日 GMT-5 09:26
COMSOL Moderator

Hello Siyuan Li

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Hamid Basaeri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 2020年1月6日 GMT-5 16:48

Hi Siyuan,

One reason that you are not getting the output voltage you expect can be due to the fact that you are not operating at the resonance frequency of your piezo elements. 10kHz may be far off the resonance frequency of your transducers. So, when you apply 1V of voltage to your transmitter it does not result in its maximum stress and deflection. In fact, I looked at your second model and I changed 10kHz to 1Hz and I got much higher voltages than 0.1V on the right piezo element. You can also use Frequency Domain study instead of a Time Dependent.

Hamid

Hi Siyuan, One reason that you are not getting the output voltage you expect can be due to the fact that you are not operating at the resonance frequency of your piezo elements. 10kHz may be far off the resonance frequency of your transducers. So, when you apply 1V of voltage to your transmitter it does not result in its maximum stress and deflection. In fact, I looked at your second model and I changed 10kHz to 1Hz and I got much higher voltages than 0.1V on the right piezo element. You can also use Frequency Domain study instead of a Time Dependent. Hamid
Siyuan Li
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 2020年1月15日 GMT-5 10:56

Hi Siyuan,

One reason that you are not getting the output voltage you expect can be due to the fact that you are not operating at the resonance frequency of your piezo elements. 10kHz may be far off the resonance frequency of your transducers. So, when you apply 1V of voltage to your transmitter it does not result in its maximum stress and deflection. In fact, I looked at your second model and I changed 10kHz to 1Hz and I got much higher voltages than 0.1V on the right piezo element. You can also use Frequency Domain study instead of a Time Dependent.

Hamid

Hi Hamid,

Thank you for your reply, I've tried the simulation in frequency domain. Indeed the resonance frequency is about 110kHz and before that the Amplitude of output is about 0.2V. It accords with the simulation in time domain. But when I change the frequency to 110kHz, the output is not a sin wave anymore. It's more like a triangular form. Do you know why it shows like that? Thank you very much.

Siyuan

>Hi Siyuan, > >One reason that you are not getting the output voltage you expect can be due to the fact that you are not operating at the resonance frequency of your piezo elements. 10kHz may be far off the resonance frequency of your transducers. So, when you apply 1V of voltage to your transmitter it does not result in its maximum stress and deflection. In fact, I looked at your second model and I changed 10kHz to 1Hz and I got much higher voltages than 0.1V on the right piezo element. You can also use Frequency Domain study instead of a Time Dependent. > >Hamid Hi Hamid, Thank you for your reply, I've tried the simulation in frequency domain. Indeed the resonance frequency is about 110kHz and before that the Amplitude of output is about 0.2V. It accords with the simulation in time domain. But when I change the frequency to 110kHz, the output is not a sin wave anymore. It's more like a triangular form. Do you know why it shows like that? Thank you very much. Siyuan
Hamid Basaeri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 2020年1月21日 GMT-5 09:26
Updated: 5 years ago 2020年1月21日 GMT-5 09:38

Hi Siyuan,

I guess when you increased the frequency from 10kHz to 110kHz, you may need more points in time to solve for. The way you define it now in your model does not do that. It just assumes the same number of points in one period. If you don't have enough points in one period of your sine wave, you may end up seeing the wave as a triangular signal rather than a sine one.

Good luck, Hamid

Hi Siyuan, I guess when you increased the frequency from 10kHz to 110kHz, you may need more points in time to solve for. The way you define it now in your model does not do that. It just assumes the same number of points in one period. If you don't have enough points in one period of your sine wave, you may end up seeing the wave as a triangular signal rather than a sine one. Good luck, Hamid

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content