Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
capacitance measurments
Posted 2011年12月28日 GMT-5 14:18 Low-Frequency Electromagnetics, Materials, Results & Visualization Version 4.2, Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
I have a question about measuring capacitance (or any other values). I want to know if there is a way to m measure these quantities in a way that we use multimeter (putting one probe on one point and the other on second point and get the value)
Lets say i have two plates and a dielectric between this. How can i find out what is the capacitance between these plates (or for example current density, or..)
I know by plotting i can get the values in different points but I want to know if there is any other way to do this.
Best
Bahareh
Lets say i have two plates and a dielectric between this. How can i find out what is the capacitance between these plates (or for example current density, or..)
I know by plotting i can get the values in different points but I want to know if there is any other way to do this.
Best
Bahareh
1 Reply Last Post 2011年12月28日 GMT-5 14:27
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I know by plotting i can get the values in different points but I want to know if there is any other way to do this.
You can get the numerical values in Results-Derived Variables