Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

reverse piezoelectric effect error

Please login with a confirmed email address before reporting spam

Hi,

I am simulating the converse and reverse piezoelectric effects.

The piezoelectric element used was PIC-255, and the elastic body was CFRP (50 GPa).

The simulation result of converse piezoelectric effect is similar to the experiment (about 20 V at 5 mm displacement).

The problem is the reverse piezoelectric effect.

In the experiment, when applied to the piezoelectric element from 0 to 110 V, displacement of about 0.5 mm occurs.

However, the simulation shows that a displacement of about 0.1 mm occurs.

To reduce this error, methods such as adhesive thickness and Base Vector System have been used but this problem still occurs.

I don't know what I overlooked.

Sincerely.


0 Replies Last Post 2020年3月2日 GMT-5 19:32
COMSOL Moderator

Hello Hyunseok Lee

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.