Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Multimode S-parameters

Posted 2012年1月10日 GMT-5 05:37 RF & Microwave Engineering Version 4.2 1 Reply

Guido Gentili
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'm using RF module in 3d and I need to compute a generalized scattering matrix of a waveguide structures. The ports are of arbitrary shape and modes must be computed numerically. But when I add a port with numerical modes, there is no way to choose how many modes one should solve for. You can set the power but not what mode should be excited with that power. I could not therefore compute the multimode generalized scattering matrix.
Note that when you set up a boundary mode problem, you can choose the number of modes, but I don't know how to transfer that info to the physical structure so as to compute the GSM.
I'm surely missing something. I've read through the examples and the manual, but the only info was how to compute the single-mode scattering matrix s11, s12, s21, s22. In my case, all these parameters are submatrices.
Any help?
Thanks in advance
Guido
1 Reply Last Post 2012年1月11日 GMT-5 01:43
Ravinder
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年1月11日 GMT-5 01:43
Thanks Guido for asking this problem . Actually I'm also facing the same problem as you . Well as we know numeric port comes in to the use when we do not know the eigenmode pattern . My question : When we do mode analysis for 2D cross section of waveguide , we need to give desired number of modes , search for modes around , transform and mode analysis frequency . By giving that information we can easily have the list of propagating and non propagating modes .But same thing we do not get for 3D structure using numeric port . Please tell me how we can have list of eigenmodes for arbitrary shape .



With Best Regards
R.k.J
Thanks Guido for asking this problem . Actually I'm also facing the same problem as you . Well as we know numeric port comes in to the use when we do not know the eigenmode pattern . My question : When we do mode analysis for 2D cross section of waveguide , we need to give desired number of modes , search for modes around , transform and mode analysis frequency . By giving that information we can easily have the list of propagating and non propagating modes .But same thing we do not get for 3D structure using numeric port . Please tell me how we can have list of eigenmodes for arbitrary shape . With Best Regards R.k.J

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content