Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to transform Bézier Polygon into a 2D surface?

Please login with a confirmed email address before reporting spam

hey peeps

I build three natural faults using Bézier Polygon, which are integrated into a chunk of 3D blocks (see attached image) and within four 2D (surface) fractures, as well as two 1D (edge) wells.

I need to assign boundary conditions to these three faults i.e. (internal) no flow boundary, I think I first have to transform them into 2D surfaces, correct me if wrong. How to do it?

ps: I tried 'convert to surface' feature but they just disappear upon 'build selected'.

many thanks for help!!!

regards
Liwah

1 Reply Last Post 2012年1月11日 GMT-5 12:46
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年1月11日 GMT-5 12:46
Hi

I suspect you need at least v 4.2 if not the latest upates to perform such large 3D mappings. Check with your local rep

--
Good luck
Ivar
Hi I suspect you need at least v 4.2 if not the latest upates to perform such large 3D mappings. Check with your local rep -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.