Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Help for insulated glass
Posted 2012年1月18日 GMT-5 10:01 Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
hello
im trying to simulate simple insulated glass in 3D (glass-air-glass (closed by any silicon)), but i cant get any results.
could you please give me any advise what i have to pay attention?
im trying to simulate simple insulated glass in 3D (glass-air-glass (closed by any silicon)), but i cant get any results.
could you please give me any advise what i have to pay attention?
1 Reply Last Post 2012年1月19日 GMT-5 00:59
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
FSI models are tricky, they are complex multiphysics and need careful understanding and tweaking, so the best is to repeat several times the different library models until you really understand the different "buttons" you can use: mesh density, material property ranges, time step ranges ...
--
Good luck
Ivar
FSI models are tricky, they are complex multiphysics and need careful understanding and tweaking, so the best is to repeat several times the different library models until you really understand the different "buttons" you can use: mesh density, material property ranges, time step ranges ...
--
Good luck
Ivar