Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

rf mems switch

Posted 2012年2月13日 GMT-5 07:59 MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Structural Mechanics Version 4.2a, Version 4.3 5 Replies

Chaitali Kasar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

can anybody upload a .mph file of rf mems switch ? i am new to Comsol. and ii want to study a movement of mems switch on this s/w.
5 Replies Last Post 2013年7月4日 GMT-4 06:52
COMSOL Moderator

Hello Chaitali Kasar

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

sll
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年9月16日 GMT-4 15:04
i have rf mems switch model tutorial of comsol 4.3 version but now i didn't get. if it get i let you know
i have rf mems switch model tutorial of comsol 4.3 version but now i didn't get. if it get i let you know
Lucky Singh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月1日 GMT-5 11:27
Billa, If you have rf mems switch model tutorial then please let me know about it.
thank you
Billa, If you have rf mems switch model tutorial then please let me know about it. thank you
Amey Revandkar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年4月14日 GMT-4 05:24
hiii,
i do hve constructed a rf switch..but thats a metal to metal contact switch...
hiii, i do hve constructed a rf switch..but thats a metal to metal contact switch...
Sarath Gopalakrishnan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年7月4日 GMT-4 06:52

hiii,
i do hve constructed a rf switch..but thats a metal to metal contact switch...


Hi,
Would it be possible for you to share it?
I tried designing the same but could not do it because the computation ended up in some error.
I want to know how you set up the parameters.
Thanks in advance.
[QUOTE] hiii, i do hve constructed a rf switch..but thats a metal to metal contact switch... [/QUOTE] Hi, Would it be possible for you to share it? I tried designing the same but could not do it because the computation ended up in some error. I want to know how you set up the parameters. Thanks in advance.
Sarath Gopalakrishnan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年7月4日 GMT-4 06:52

hiii,
i do hve constructed a rf switch..but thats a metal to metal contact switch...


Hi,
Would it be possible for you to share it?
I tried designing the same but could not do it because the computation ended up in some error.
I want to know how you set up the parameters.
Thanks in advance.
[QUOTE] hiii, i do hve constructed a rf switch..but thats a metal to metal contact switch... [/QUOTE] Hi, Would it be possible for you to share it? I tried designing the same but could not do it because the computation ended up in some error. I want to know how you set up the parameters. Thanks in advance.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content