Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Material Properties.

Wagner Gurgel do Amaral Filho

Please login with a confirmed email address before reporting spam

Hello Everybody, Good Morning!

I have a little problem in the AC/DC simulation.
I made a 2D transformer model and when I start the simulation, the Flux conduced in the air and not in the core.
I don´t know why, but I try everything and I can´t do the flux pass in the core.
Other problem is about the material properties, because I don´t have the AC/DC iron silicom M4 properties in my software.

Could you help me?


1 Reply Last Post 2012年2月28日 GMT-5 07:46
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年2月28日 GMT-5 07:46
Hi

be sure you define correctly your material properties in the corresponding material sub-nodes, and then apply the material to the right domains

Then be sure you ACDC model comprises all desired domains, and that you have not overridden the material propaeries by some fixed values in the "physics" nodes

You can always make your own material properties and save these into your "private" material library

--
Good luck
Ivar
Hi be sure you define correctly your material properties in the corresponding material sub-nodes, and then apply the material to the right domains Then be sure you ACDC model comprises all desired domains, and that you have not overridden the material propaeries by some fixed values in the "physics" nodes You can always make your own material properties and save these into your "private" material library -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.