Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Inquiry for the Integration Coupling Variables

Posted 2012年3月3日 GMT-5 00:36 MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 3.5a 0 Replies

Jianan Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

When going through the COMSOL model library documents, I find something very confused. In the page 501of memsmodlib.pdf, why the integration of admittance of resonator times 0.5mm, which is the width of electrode. To my own understanding, if the integration is carried on along the line of electrode, then the formula should be "1.7[mm]*nJs_smppn/1[V]", where the 1.7mm indicates the thickness of the electrode. This might be just like the formula provided below, which indicates the thickness of substrate as well.

And I think the problem might be derived from my understanding towards the "nJs_smppn" and "nIav_smppn". Hope you could answer me about this question. Thanks a lot!


Best regards.
0 Replies Last Post 2012年3月3日 GMT-5 00:36
COMSOL Moderator

Hello Jianan Wang

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content