Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Time dependent moving

Posted 2012年3月3日 GMT-5 09:20 Version 4.2 2 Replies

JiYoung Park
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I want to move the material from t=0 to t=5 seconds and stop after 5 seconds with moving mesh.(velocity=1)

So I typed, t*(t>0)-t*(t>5)

But, i found the material moves back to its original place after 5 seconds.

Plz help

Thanks

2 Replies Last Post 2012年3月3日 GMT-5 10:31
Jaap Verheggen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年3月3日 GMT-5 09:44
Is this supposed to be an equation for velocity or for displacement.

You're not giving a lot of information.
Is this supposed to be an equation for velocity or for displacement. You're not giving a lot of information.
JiYoung Park
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年3月3日 GMT-5 10:31
I got it!

It was displacement.

But can i ask you one more thing?

I typed 0.1m/s in mesh velocity

and I tried to solve for 10 seconds.

But it didn't move 1 m, but less than that

Can you explain why?


Thanks!
I got it! It was displacement. But can i ask you one more thing? I typed 0.1m/s in mesh velocity and I tried to solve for 10 seconds. But it didn't move 1 m, but less than that Can you explain why? Thanks!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content