Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Mesh warning (size): There is no feature using these settings

Posted 2020年8月2日 GMT-4 04:46 1 Reply

Nanda Kishore Bellam Muralidhar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

The below post is related to an archived discussion

[start here] Could someone please comment on this error? During my very first simulation, I have experienced such warning in the mesh module. Are we supposed to select a particular configuration for the element size (which is built-in) comsol itself? Please help me!! Thank you. -Nanda Kishore BM

1 Reply Last Post 2020年8月4日 GMT-4 06:37
Lars Dammann COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2020年8月4日 GMT-4 06:37

Hi, I would recommend to start with the basics of meshing. For example, this video will probably make it more clear: https://www.comsol.com/learning-center/building-the-mesh-for-a-model-geometry-in-comsol-multiphysics

Hi, I would recommend to start with the basics of meshing. For example, this video will probably make it more clear: https://www.comsol.com/learning-center/building-the-mesh-for-a-model-geometry-in-comsol-multiphysics

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content