Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Error in sweep
Posted 2020年9月20日 GMT-4 20:50 Wave Optics, Studies & Solvers 0 Replies
Please login with a confirmed email address before reporting spam
Hi,
I'm running a Electromagnetic Wave, Frequency Domain simulation where in the parametric sweep, frequencies are defined by giving the wavelength. My simulation works fine for some wavelength range, say any wavelength above 5um however, when I try to run this for wavelenths below 5um, I get the following error for some wavelengths. Can someone kindly explain me the possible reason for this?
Error in sweep. The following feature has encountered a problem:
Undefined value found. - Detail: Undefined value found in the equation residual vector. There are 1 degrees of freedom giving NaN/Inf in the vector for the variable comp1.ewfd.S1x. at coordinates: (0,0), ... There are 1 degrees of freedom giving NaN/Inf in the vector for the variable comp1.ewfd.S2x. at coordinates: (0,0), ... - Feature: Stationary Solver 1 (sol1/s1)
P.S. I have included all the boundary conditions considered in theory in the model.
Hello Sachinthana Pathiranage
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.