Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Storing of data at frequent time interval
Posted 2020年12月31日 GMT-5 19:33 Fluid & Heat, General, Computational Fluid Dynamics (CFD) Version 5.4 2 Replies
Please login with a confirmed email address before reporting spam
Dear sir/madam, Acn you tell me the procedure to save the data of simulation at a fixed interval of time, e.g., 1 hr automatically while simulation is running to avoid the loss of any data during power cut of network failure.
Please login with a confirmed email address before reporting spam
- First of all, look up "Saving and Opening Recovery Files" in the help system. Using this feature is the easiest thing to do.
- I recommend powering your computer with a fairly decent quality uninterruptible power supply (UPS). This will protect you for at least several minutes, depending on capacity.
- Also, if you have a UPS with sufficient capacity, it just may provide you with enough minutes of run-time for you to go outside, set up, and start your modest-sized inverter-type generator (You have one, right? Doesn't everyone? :-) ), then unroll and connect a long power cable going all the way back to your UPS, all before the UPS shuts down!
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Please login with a confirmed email address before reporting spam
Thank you very much for your suggestion.