Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Recommended clock rate for COMSOL simulations?

Posted 2021年1月20日 GMT-5 20:19 Fluid & Heat, Computational Fluid Dynamics (CFD), Particle Tracing for Fluid Flow Version 5.6 1 Reply

Joshua Guertler
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I was curious if there's a recommended range for CPU clock rates. I've got a CPU with a 2.13 GHz clock rate. Would this be enough for most chemistry and fluid-based COSMOL simulations?

1 Reply Last Post 2021年1月20日 GMT-5 22:40
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021年1月20日 GMT-5 22:40

It's usually more important for you to have a lot of RAM! Take a look at: https://www.comsol.com/support/knowledgebase/866 for more advice about what computer hardware is appropriate.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
It's usually more important for you to have *a lot of RAM*! Take a look at: **https://www.comsol.com/support/knowledgebase/866** for more advice about what computer hardware is appropriate.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content