Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Calculate phase delay and amplitude with s-parameters

Posted 2021年1月25日 GMT-5 05:13 Low-Frequency Electromagnetics, RF & Microwave Engineering, Wave Optics 2 Replies

Vittorio Bonino
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Good morning everybody,

my problem consists in a electromagnetic 3D model with 2 ports that are two opposite faces of an air parallelopiped. One of the two port is excited and the electric field travel throught the other port. I obtained ewfd.S21 and ewfd.S11. Now I'd like to plot group delay and amplitude of the field at the second port. How can I compute these two elements?

Image

Thank you!

Attachments:

2 Replies Last Post 2021年2月1日 GMT-5 05:23
Dennis Brown
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021年1月26日 GMT-5 08:03

If you have the s-parameters you should be able to calculate the group delay from them. There are many sites like this on the web:

https://www.microwaves101.com/encyclopedias/group-delay-measurements

For your second question, I am not sure what you want to do here but I would think you could plot field patterns using slice plots? You could also place a line in the structure (kind of an axial line from end to end, not touching the box ends) and make a 1D plot and plot the field strength along that line.

If you have the s-parameters you should be able to calculate the group delay from them. There are many sites like this on the web: https://www.microwaves101.com/encyclopedias/group-delay-measurements For your second question, I am not sure what you want to do here but I would think you could plot field patterns using slice plots? You could also place a line in the structure (kind of an axial line from end to end, not touching the box ends) and make a 1D plot and plot the field strength along that line.
Vittorio Bonino
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021年2月1日 GMT-5 05:23

Thank you for the informations

Thank you for the informations

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content