Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
application of AC signal
Posted 2012年4月25日 GMT-4 04:19 Low-Frequency Electromagnetics Version 3.5a 1 Reply
Please login with a confirmed email address before reporting spam
Hello everyone,
i am working with "DC conductive media" of AC/DC module. For the same kind of geometry, i would like to apply an alternative current, i.e. sinusoidal. Do you know which module of AC/DC should I use?
Thank you in advance!
Marilena
i am working with "DC conductive media" of AC/DC module. For the same kind of geometry, i would like to apply an alternative current, i.e. sinusoidal. Do you know which module of AC/DC should I use?
Thank you in advance!
Marilena
1 Reply Last Post 2012年4月25日 GMT-4 04:50
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
it depends whether you are interested in induction effects or not. If not Quasi-Statics Electric will probably do the job. If you have to consider magnetic fields as well go for Quasi-Statics Electromagnetic.
Cheers
Edgar
it depends whether you are interested in induction effects or not. If not Quasi-Statics Electric will probably do the job. If you have to consider magnetic fields as well go for Quasi-Statics Electromagnetic.
Cheers
Edgar