Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Stopped-flow injection for 3D reactive transport modeling
Posted 2021年3月14日 GMT-5 01:15 Porous Media Flow 0 Replies
Please login with a confirmed email address before reporting spam
Hi,
I am doing a single-phase reactive transport model. I would like to ask if it is possible to have alternating flow and no-flow from an injection point (e.g. 1hr of flow, then 1hr of no-flow, and 1hr of flow again)? Also, is it possible to create one injection point in a 3D porous media (i.e. injecting fluid from an injection pipe at the center of the surface boundary of a 3D porous media, there is no flow except from the injection point)?
Thank you.
Oliver
Hello Oliver Ramos
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.