Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Detaching bubble - ALE moving mesh
Posted 2021年4月8日 GMT-4 23:00 Chemical, Computational Fluid Dynamics (CFD), Mesh 0 Replies
Please login with a confirmed email address before reporting spam
Hi,
I modeling a growing bubble using ALE moving mesh in COMSOL. The bubble is pined at the surface, but at some point a neck is formed and the bubble detaches. I am aware of the limits for ALE moving mesh in such problems. But, I am interested in stopping the solution when the detachment is expected, save the solution at that point, reconstruct the bubble geometry not touching the wall and continue the solution from that point, using the copied solution from the previous step as an initial condition. Does general extrusion seems to be a useful tool in this procedure? I would appreciate comments on this problem.
Best regards, NP
Hello Natan Padoin
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.