Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Advancing and Receding Contact Angles- Laminar two phase flow, level set method
Posted 2021年6月28日 GMT-4 18:39 Fluid & Heat, Computational Fluid Dynamics (CFD), Microfluidics Version 5.6 1 Reply
Please login with a confirmed email address before reporting spam
Hello, I'm trying to incorporate different advancing/recding contact angles for a water droplet surrounded by air on a solid surface. I'm using laminar two-phase flow, level-set method to model the air and water interfaces, and defining the contact angle explicitly as a constant in the wetted wall BC. What I want to do next, is apply different contact angles for advancing/receding motions of the droplets, as well as be able to capture contact angle hysteresis. Is there a way I can extract the contact line velocity, and apply dynamic contact angle as a function of that velocity?
Please login with a confirmed email address before reporting spam
Hello,
You can define the contact angle with the expression or variable within the parameter list.Then under the wetter wall, restate this variable or expression of interest. Next , Add parametric sweep under the Study, to run simulation for the various contact angle values you want. Also i hope this link below gives more information.
https://www.osapublishing.org/oe/fulltext.cfm?uri=oe-29-10-15733&id=450868