Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

error in porous electrode reaction for solid oxide fuel cell?

Posted 2012年6月13日 GMT-4 04:21 Heat Transfer & Phase Change, Battery Design, Parameters, Variables, & Functions Version 4.2, Version 4.2a 0 Replies

Omid Razbani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

If you create a "porous electrode reaction" within a porous electrode, you will see this equation:
eta= Phis-Phil-Eeq


The correct voltage balance may be written as:
eta=Eeq- abs(Phis-Phil)

reference: R. Bove, S. Ubertini, "Modeling solid oxide fuel cells", Springer, 2008

anybody can explain this?

I got a negative heat source for cathode power dissipation as a result of this negative sign error!
0 Replies Last Post 2012年6月13日 GMT-4 04:21
COMSOL Moderator

Hello Omid Razbani

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content