Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

The Geomechanics Module

Posted 2021年10月7日 GMT-4 04:39 1 Reply

Malgorzata Wojcik, PhD The CHEMKOP Company
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everybody,

Do I need the Geomechanics module for modeling stress, strain (von Mises stress, effective strain, the displacement, strength/stress ratio, safety) in salt cavern model?

Thank you so much.

1 Reply Last Post 2021年10月7日 GMT-4 05:21
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2021年10月7日 GMT-4 05:21

Whether or not you need the Geomechanics Module depends on which material models you plan to use. All of what you have mentioned you can find in the Structural Mechanics Module, as long as the material is linear elastic.

-------------------
Henrik Sönnerlind
COMSOL
Whether or not you need the Geomechanics Module depends on which material models you plan to use. All of what you have mentioned you can find in the Structural Mechanics Module, as long as the material is linear elastic.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content