Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Coupling transport of a species to surface reactions

Posted 2012年7月6日 GMT-4 13:09 Fluid & Heat, Chemical Reaction Engineering, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.3 6 Replies

Kelley Rabjohns
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am trying to make a model that has laminar flow, transport of a dilute species, and surface reactions. I want the laminar flow and transport of a dilute species to distribute the chemical species throughout the model, and then for there to be reactions that consume that species on the surface of a sphere. I am having a very hard time trying to couple the species that is in the transport of dilute species to the species that is being consumed in the surface reactions. Is there any way to do this? Or should I just try to add the consumption of the species in the transport, which I could do, but I could not have the reactions occur only of the surface of a sphere.
Essentially I want there to be chemical reaction on the surface of a sphere, but I need those reactions to alter the space around it. I need the chemical species to decrease its concentration as it gets closer to the sphere.
Any help would be much appreciated.
Thank you!

Kelley
6 Replies Last Post 2016年11月11日 GMT-5 16:40
Mayur
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月6日 GMT-4 21:29
Hi,
Could u explain it properly, wht kind of reactions are u trying solve, and u can also put few pics of your model, if u don't want to share ur model in explaining it.
Hi, Could u explain it properly, wht kind of reactions are u trying solve, and u can also put few pics of your model, if u don't want to share ur model in explaining it.
Joshua Menezes
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年5月20日 GMT-4 14:18
Hello Kelley,

I am relatively new to COMSOL and am running a very similar simulation and having the same difficulty you mentioned in your post. Did you ever get this issue solved? If so I'd love to have some guidance on how I might be able to correct my simulation.

Hello Kelley, I am relatively new to COMSOL and am running a very similar simulation and having the same difficulty you mentioned in your post. Did you ever get this issue solved? If so I'd love to have some guidance on how I might be able to correct my simulation.
Walter Frei COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年5月20日 GMT-4 15:08
Dear Kelly, Joshua,

What you are describing can be done with the Chemical Reaction Engineering Module.
Please see, for example:
www.comsol.com/model/protein-adsorption-1397

And, for a basic introductory example which shows how to manually enter governing equations if you do not have the Chemical Reaction Engineering Module, see:
www.comsol.com/model/transport-and-adsorption-5

Best Regards,
Dear Kelly, Joshua, What you are describing can be done with the Chemical Reaction Engineering Module. Please see, for example: https://www.comsol.com/model/protein-adsorption-1397 And, for a basic introductory example which shows how to manually enter governing equations if you do not have the Chemical Reaction Engineering Module, see: https://www.comsol.com/model/transport-and-adsorption-5 Best Regards,
Joshua Menezes
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年5月20日 GMT-4 15:29
Walter,

I appreciate the help but unfortunately I am unable to open your models as I am running 4.3a. Do you have any models that would run on that version?

The simulation I am running is a fluid flow running through a cylindrical chamber from an inlet, hitting a sphere, going around the sphere, then leaving through an outlet. I am running a time-dependent study with the physics laminar flow and transport of diluted species. Currently, I have species A coming in as an inflow and I would like the local concentration of species A on the surface of the sphere (inside the cylindrical channel) to determine how much of Species B is released from the sphere.

Is there a way I can simulate this if I only have the Microfluidics Module purchased?

Thanks again,

Josh
Walter, I appreciate the help but unfortunately I am unable to open your models as I am running 4.3a. Do you have any models that would run on that version? The simulation I am running is a fluid flow running through a cylindrical chamber from an inlet, hitting a sphere, going around the sphere, then leaving through an outlet. I am running a time-dependent study with the physics laminar flow and transport of diluted species. Currently, I have species A coming in as an inflow and I would like the local concentration of species A on the surface of the sphere (inside the cylindrical channel) to determine how much of Species B is released from the sphere. Is there a way I can simulate this if I only have the Microfluidics Module purchased? Thanks again, Josh
Walter Frei COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年5月20日 GMT-4 17:31
Dear Josh,

We do of course encourage you to come back on subscription, and to upgrade to one of the Modules that support surface reactions. See www.comsol.com/products/specifications/chemical/ for a listing of what features are available in which Modules.

Also, take a look over the step-by-step instructions in the second example (www.comsol.com/model/transport-and-adsorption-5) you should be able to reproduce these in any recent version of the software.

Best Regards,
Dear Josh, We do of course encourage you to come back on subscription, and to upgrade to one of the Modules that support surface reactions. See https://www.comsol.com/products/specifications/chemical/ for a listing of what features are available in which Modules. Also, take a look over the step-by-step instructions in the second example (https://www.comsol.com/model/transport-and-adsorption-5) you should be able to reproduce these in any recent version of the software. Best Regards,
Nazmul Alam
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年11月11日 GMT-5 16:40
Hi Walter,
In the "www.comsol.com/model/transport-and-adsorption-5" model you suggested, the chemical reaction is on a one-dimensional surface. If the surface is a sphere (3D), how would you formulate the PDE? Will that be similar to the model?
Thank you in advance.
Hi Walter, In the "https://www.comsol.com/model/transport-and-adsorption-5" model you suggested, the chemical reaction is on a one-dimensional surface. If the surface is a sphere (3D), how would you formulate the PDE? Will that be similar to the model? Thank you in advance.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content