Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Use Result from one Study as Initial Condition for second Study
Posted 2022年1月12日 GMT-5 10:02 General, Studies & Solvers, Biosciences Version 5.6 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I'm having a problem with the following. I use comsol to solve two coupled differential equations for the two concentrations of the system over time. At some point in time(let's call it T) I want to increase the timestep drastically and my idea was to make the simulation from times 0 to T with the small time step in Study1 and to use the calculated concentrations from Study1 at time T for the second study as an initial condition in which the timestep is now really big. For one of the two concentrations that works fine - the initial condition is the correct one but for the second concentration comsol chooses 0 instead of the solution from Study1. A picture of my approach is inserted below. Has anyone faced a similar problem or knows how to solve it?
Best regards, Luca
Attachments:
Please login with a confirmed email address before reporting spam
You may define time stepping rather freely, you do not need to do two consequent studies. I suggest something like the following:
range(0,T/100,T),range(T,T,100*T)
cheers Lasse