Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

CPW simulation

Posted 2012年7月19日 GMT-4 04:54 RF & Microwave Engineering Version 4.2 0 Replies

Prthivirajan Velraju
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

i am solving rf analysis of coplanar wave guide. i have designed the geometry of coplanar wave guide in 3D. study type is frequency domain. In my design substrate is silicon, above that three conductors(coplanar waveguide) deposited. among the three conductors, i gave ports(rectangular) to both end of the center conductor. CPW material is copper. After computing this module the result is in the center conductor the signal is passed fully, i need the help that how to solve this problem and calculate S-parameters for CPW at particular frequency?
0 Replies Last Post 2012年7月19日 GMT-4 04:54
COMSOL Moderator

Hello Prthivirajan Velraju

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content