Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to select the connected line in the graphic window at once?

Posted 2022年2月16日 GMT-5 03:10 Interfacing, Geometry 1 Reply

성훈 배
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone,

The problem I faced is following. I imported a complex geometry. so, there are many line. I want to know how to select the connected line in the graphic window at once. If you know how to do it, please tell me.

Best regards, Hoon.

1 Reply Last Post 2022年2月16日 GMT-5 03:14
Acculution ApS Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2022年2月16日 GMT-5 03:14

You should look into Selections; you might be able to select one line and then use Group by continous tangent to have comsol select the rest. Depending on what you are trying to do.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
You should look into Selections; you might be able to select one line and then use Group by continous tangent to have comsol select the rest. Depending on what you are trying to do.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content