Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

COMSOL capabilities question

Please login with a confirmed email address before reporting spam

How could COMSOL be used to help me in the design of a MEMs acoustics pressure sensor?

1 Reply Last Post 2012年8月10日 GMT-4 03:25
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年8月10日 GMT-4 03:25
Hi

I would say in all ways ;) but again what do you want to model, internal stress levels, shape versus response ...
In anycase it can quickly become quite a complex multi-physics model, so my advice: start simple one physics at the time, start in 2D or 2D-axi, then move to 3D

And do not forget to validate carefully your models with measurements on existing samples

--
Good luck
Ivar
Hi I would say in all ways ;) but again what do you want to model, internal stress levels, shape versus response ... In anycase it can quickly become quite a complex multi-physics model, so my advice: start simple one physics at the time, start in 2D or 2D-axi, then move to 3D And do not forget to validate carefully your models with measurements on existing samples -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.