Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to have correct expression for stop condition
Posted 2012年8月16日 GMT-4 00:05 Parameters, Variables, & Functions, Studies & Solvers Version 4.2a, Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
I would like to set the stop condition so when the internal time step below 1e-9, it will stop.
I set it as timestep-1e-8, so, so when it is below 1e-8, i will expect it to stop.
However, instead of pop up stop condition fulfilled, it give me an error.
May i know what's wrong with my stop condition expression?
I attached the file for your information.
Thank you
p/s: referring to comsol documentation
"Another example is timestep-0.04, which makes the solver stop when the internal time step drops below 0.04 s (when the time-dependent solver hits a sharp transient, for example)."
Attachments:
Hello Chiwei Ong
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.