Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to simulate Acoustic Reflection coefficient ?

Please login with a confirmed email address before reporting spam

Dear all,

I am new to comsol. !

I am using comsol 6.0 and I am a student.

Could someone help me to make a simple acoustic model ?

I want to simulate the reflection coefficient of wall2 as attached picture.

picture:https://photos.app.goo.gl/PehecCNTTVEo8Adr9 https://photos.app.goo.gl/PehecCNTTVEo8Adr9

Thanks and Regards! Han



1 Reply Last Post 2022年10月31日 GMT-4 14:23
Mark Cops COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2022年10月31日 GMT-4 14:23

Dear Han Nguyen,

For modeling reflection/transmission coefficients, it is useful to apply a background pressure field as the excitation. Then, the scattered field can be separated from the incident field. You can see this example in the COMSOL gallery (https://www.comsol.com/model/acoustic-transmission-loss-through-periodic-elastic-structures-1974) for how this is done.

Best,

Mark

Dear Han Nguyen, For modeling reflection/transmission coefficients, it is useful to apply a background pressure field as the excitation. Then, the scattered field can be separated from the incident field. You can see this example in the COMSOL gallery (https://www.comsol.com/model/acoustic-transmission-loss-through-periodic-elastic-structures-1974) for how this is done. Best, Mark

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.