Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
problem with "zoom in" to see a very small structure
Posted 2012年9月9日 GMT-4 10:21 Chemical Reaction Engineering, Electrochemistry, Geometry, Parameters, Variables, & Functions, Results & Visualization Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
I was using the similar model as a " Copper Deposition in a Trench" in model gallery, just different in dimensions.
I need the distance between Anode and Cathode to be 65 mm, and depth of the trench to be 105 nm.
Since the difference in those two parameters, I could not use "zoom in" to see the deposited layer inside the trench.
Do there has any way to see what's happening inside that small part since the dimension of it is extremely smaller that the bulk.
Thank you very much for your help,
Thongchai
Hello Thongchai Asavaparjukul
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.